IPAM Provider (Avi Vantage)

This article walks through the configuration of Avi Vantage’s native IPAM solution, which is available for the following clouds:

  • Containers (Mesos, OpenShift, Docker UCP, Rancher)
  • Linux server cloud (bare metal)
  • VMware
  • No Access

See also: Service Discovery Using IPAM and DNS

IPAM Configuration

Avi Vantage allocates IP addresses from a pool of IP addresses within the subnet configured as listed below.

  1. Navigate to Infrastructure > Clouds, and click on the cloud name.
  2. Select Network and click Create.
  3. Enter a name for the network.
  4. Add networks for IP address allocation:
    1. Click Add Subnet.
    2. Enter the subnet address, in the following format:
    3. Click Add Static IP address pool. Avi Vantage will allocate IP addresses from this pool. For example,
    4. Click Save.
    5. Repeat 1-4 for each network to be used for IP address allocation.
  5. Click Save.


  • Virtual service creation will fail if the static IP address pool is empty or exhausted.
  • For east-west IPAM (applicable to container-based clouds, i.e., Mesos, OpenShift, Docker UCP, and Rancher), create another network with the appropriate link-local subnet and a separate IPAM/DNS Profile.

North-south IPAM network creation after following steps above:


East-west IPAM network configuration:



IPAM networks are now created. Navigate to Templates > IPAM/DNS Profile and create a placeholder for IPAM (separate one for east-west wherever it’s relevant). You can assign one or more of the networks created above to be default usable networks if no specific network and/or subnet are provided in the virtual service configuration. The administrator can configure these networks, thus eliminating the need for developers to provide specific network/subnets while creating their applications.