Install Avi Kubernetes Operator

Overview

The Avi Kubernetes Operator (AKO) is an operator which works as an ingress Controller and performs Avi-specific functions in a Kubernetes/ OpenShift environment with the Avi Controller. It remains in sync with the necessary Kubernetes/ OpenShift objects and calls Avi Controller APIs to configure the virtual services.

The AKO deployment consists of the following components:

  • The Avi Controller
  • The Service Engines (SE)
  • The Avi Kubernetes Operator (AKO)

An overview of the AKO deployment is as shown below:

AKO

Create a Cloud in Avi Vantage

The Avi infrastructure cloud will be used to place the virtual services that are created for the Kubernetes/ OpenShift application.

As a prerequisite to create the cloud, it is recommended to have IPAM and DNS profiles configured.

Configure IPAM and DNS Profile

Configure the IPAM profile and select the underlying network and the DNS profile which will be used for ingresses and external services.

To configure the IPAM Profile,

  1. Navigate to Templates > Profiles > IPAM/DNS.
  2. Edit the IPAM profile as shown below:

    ipam

    Note: Usable network for the virtual services created by the AKO instance must be provided using the fields vipNetworkList|subnetIP|subnetPrefix fields during helm installation.

  3. Click on Save.

To configure the DNS Profile,

  1. Navigate to Templates > Profiles > IPAM/DNS.
  2. Configure the DNS profile with the Domain Name.

    dns

  3. Click on Save.

Configure the Cloud

  1. Navigate to Infrastructure > Clouds.
  2. Select the vCenter cloud and click on the edit icon.
  3. Under the Infrastructure tab, select the IPAM and DNS profiles created for the north-south apps as shown below:

    ipam

  4. Under the Data Center tab, select the Data Center and enable DHCP as the IP address management scheme.

    ipam

  5. Under the Network tab, select the Management Network.

    ipam

  6. Click on Save.

AKO in NSX-T deployments

Starting with AKO version 1.5.1, AKO supports the NSX-T write access cloud for both NCP and non-NCP CNIs. In case of NCP CNI, the pods are assumed to be routable from the SE’s backend data network segments. Due to this, AKO disables the static route configuration when the CNI is specified as ncp in the values.yaml. However, if non-ncp CNIs are used, AKO assumes that static routes can be configured on the the SEs to reach the pod networks. In order for this scenario to be valid, the SEs backend data network must be configured on the same logical segment on which the Kubernetes/OpenShift cluster is run.

In addition to this, AKO supports both overlay as well as VLAN backed NSX-T cloud configurations. AKO automatically ascertains if a cloud is configured with overlay segments or is used with VLAN networks.
The VLAN backed NSX-T setup behaves the same as vCenter write access cloud, thus requiring no inputs from you. However, the overlay based NSX-T setups require configuring a logical segment as the backend data network and correspondingly configure the T1 router’s info during bootup of AKO via the Helm values parameter NetworkSettings.nsxtT1LR.

Configure SE Groups and Node Network List

SE Groups

AKO supports SE groups. Using SE groups, all the clusters can now share the same VRF. Each AKO instance mapped to a unique serviceEngineGroupName. This will be used to push the routes on the SE to reach the pods. Each cluster needs a dedicated SE group, which cannot be shared by any other cluster or workload.

Note If the label is already configured, ensure the cluster name matches with the value.

Pre-requisites

  • Ensure the Avi Controller is of version 18.2.10 or later.

  • Create SE groups per AKO cluster (out-of-band)

Node Network List

In a vCenter cloud, nodeNetworkList is a list of PG networks that OpenShift/Kubernetes nodes are a part of. Each node has a CIDR range allocated by Kubernetes. For each node network, the list of all CIDRs has to be mentioned in the nodeNetworkList.
For example, consider the Kubernetes nodes are a part of two PG networks - pg1-net and pg2-net.
There are two nodes which belong to pg1-net with CIDRs 10.1.1.0/24 and 10.1.2.0/24.
There are three nodes which belong to pg2-net with CIDRs 20.1.1.0/24, 20.1.2.0/24, and 20.1.3.0/24.
Then nodeNetworkList contains:

  • pg1-net
    • 10.1.1.0/24
    • 10.1.2.0/24
  • pg2-net
    • 20.1.1.0/24
    • 20.1.2.0/24
    • 20.1.3.0/24

Note: The nodeNetworkList is only used in the ClusterIP deployment of AKO and in vCenter cloud and only when disableStaticRouteSync is set to False.

If two Kubernetes clusters have overlapping CIDRs, the SE needs to identify the right gateway for each of the overlapping CIDR groups. This is achieved by specifying the right placement network for the pools that helps the Service Engine place the pools appropriately.

Configure the fields serviceEngineGroupName and nodeNetworkList in the values.yaml file.

Install Helm CLI

Helm is an application manager for OpenShift/Kubernetes. Helm charts are helpful in configuring the application.
Refer to the Helm Installation for more information.

AKO can be installed with or without internet access on the cluster.

Install AKO for Kubernetes

  1. Create the avi-system namespace:
    
     kubectl create ns avi-system
     

    Notes:

    • AKO can run in namespaces other than avi-system. The namespace in which AKO is deployed, is governed by the --namespace flag value provided during Helm install. There are no updates in the setup steps. avi-system has been kept as is in the entire documentation, and should be replaced by the namespace provided during AKO installation.
    • Helm version 3.8 and above will be required to proceed with helm installation.
  2. Search the available charts for AKO:
     
    helm show chart oci://projects.registry.vmware.com/ako/helm-charts/ako --version 1.7.6
    
    Pulled: projects.registry.vmware.com/ako/helm-charts/ako:1.7.6
    Digest: sha256:xyxyxxyxyx
    apiVersion: v2
    appVersion: 1.7.6
    description: A helm chart for Avi Kubernetes Operator
    name: ako
    type: application
    version: 1.7.6
    
  3. Use the values.yaml from this chart to edit values related to Avi configuration. To get the values.yaml for a release, run the following command:
    
     helm show values oci://projects.registry.vmware.com/ako/helm-charts/ako --version 1.7.6 > values.yaml
     
  4. Edit the values.yaml file and update the details according to your environment.

  5. Install AKO:
    Starting with AKO 1.7.1, multiple AKO instances can be installed in a cluster.
    Notes:
    • Out of multiple AKO instances, only one AKO instance should be Primary.
    • Each AKO instance should be installed in a different namespace.

    Primary AKO Installation:

    
    helm install --generate-name oci://projects.registry.vmware.com/ako/helm-charts/ako --version 1.7.6 -f /path/to/values.yaml  --set ControllerSettings.controllerHost=<controller IP or Hostname> --set avicredentials.username=<avi-ctrl-username< --set avicredentials.password=<avi-ctrl-password> --set AKOSettings.primaryInstance=true --namespace=avi-system
    

    Secondary AKO Installation:

    
    helm install --generate-name oci://projects.registry.vmware.com/ako/helm-charts/ako --version 1.7.6 -f /path/to/values.yaml  --set ControllerSettings.controllerHost=<controller IP or Hostname> --set avicredentials.username=<avi-ctrl-username> --set avicredentials.password=<avi-ctrl-password> --set AKOSettings.primaryInstance=false --namespace=avi-system
    
  6. Verify the installation:
    
     helm list -n avi-system
     NAME          	NAMESPACE 	REVISION	UPDATED     STATUS  	CHART    	APP VERSION
     ako-1691752136	avi-system	1       	2023-08-11	deployed	ako-1.7.6	1.7.6
     

Uninstall using Helm

To uninstall AKO using helm,

  1. Run the following:
    
    helm delete <ako-release-name> -n avi-system
    

    Note: The ako-release-name is obtained by running the helm list as shown in the previous step,

  2. Run the following:
    
    kubectl delete ns avi-system
    

AKO in OpenShift Cluster

AKO can be used in the in an OpenShift cluster to configure routes and services of type Loadbalancer.

Pre-requisites for Using AKO in OpenShift Cluster

  1. Configure an Avi Controller with a vCenter cloud and select the IPAM and DNS profiles created for the north-south apps.

  2. Ensure the OpenShift version is 4.4 or higher to perform a Helm-based AKO installation.
    Note: For OpenShift 4.x releases prior to 4.4 that do not have Helm, AKO needs to be either installed manually or Helm 3 needs to be manually deployed in the OpenShift cluster.

    Ingresses, if created in the OpenShift cluster will not be handled by AKO.

Install AKO for OpenShift

Follow these steps to install AKO using helm in Openshift environment. Note: Helm version 3.8 and above will be required to proceed with helm installation.

  1. Create the avi-system namespace.
    
     oc new-project avi-system
     
  2. Search for available charts
    
      helm show chart oci://projects.registry.vmware.com/ako/helm-charts/ako --version 1.7.6
    
       Pulled: projects.registry.vmware.com/ako/helm-charts/ako:1.7.6
       Digest: sha256:xyxyxxyxyx
       apiVersion: v2
       appVersion: 1.7.6
       description: A helm chart for Avi Kubernetes Operator
          name: ako
       type: application
       version: 1.7.6
      
  3. Edit the values.yaml file and update the details according to your environment.
    
     helm show values oci://projects.registry.vmware.com/ako/helm-charts/ako --version 1.7.6 > values.yaml
    
     
  4. Install AKO
    
    helm install --generate-name oci://projects.registry.vmware.com/ako/helm-charts/ako --version 1.7.6 -f /path/to/values.yaml  --set ControllerSettings.controllerHost=>controller IP or Hostname< --set avicredentials.username=>avi-ctrl-username< --set avicredentials.password=>avi-ctrl-password< --namespace=avi-system
    
  5. Verify the installation.
    
    helm list -n avi-system
       
    NAME          	NAMESPACE 	REVISION	UPDATED     STATUS  	CHART    	APP VERSION
    ako-1691752136	avi-system	1       	2023-08-11	deployed	ako-1.7.6	1.7.6
    

Note: Only Helm version 3.0 is supported.

Installing AKO Offline Using Helm

Pre-requisites for Installation

Ensure the following prerequisites are met:

  • The Docker image is downloaded from the My VMware portal.
    Note: Log in to the portal using your My VMware credentials.
  • A private container registry to upload the AKO Docker image
  • Helm version 3.0 or higher installed

Installing AKO

To install AKO offline using Helm,

  1. Extract the .tar file to get the AKO installation directory with the helm and docker images.
    
     tar -zxvf ako_cpr_sample.tar.gz
     ako/
     ako/install_docs.txt
     ako/ako-1.7.6-docker.tar.gz
     ako/ako-1.7.6-helm.tgz
    
  2. Change the working directory to this path: cd ako/.

  3. Load the docker image in one of your machines.
    
     sudo docker load < ako-1.7.6-docker.tar.gz
     
  4. Push the docker image to your private registry. For more information, click here.

  5. Extract the AKO Helm package. This will create a sub-directory ako/ako which contains the Helm charts for AKO (ako/chart.yaml crds templates values.yaml).

  6. Update the helm values.yaml with the required AKO configuration (Controller IP/credentials, docker registry information etc).

  7. Create the namespace avi-system on the OpenShift/Kubernetes cluster.
    
      kubectl create namespace avi-system
      
  8. Install AKO using the updated helm charts.
    
     helm install ./ako --generate-name --namespace=avi-system
     

Upgrade AKO

AKO is stateless in nature. It can be rebooted/re-created without impacting the state of the existing objects in Avi if there’s no requirement of an update to them. AKO will be upgraded using Helm.

During the upgrade process a new docker image will be pulled from the configured repository and the AKO pod will be restarted.

On restarting, the AKO pod will re-evaluate the checksums of the existing Avi objects with the REST layer’s intended object checksums and do the necessary updates.

Notes for Upgrading from versions lower than 1.5 to version 1.7:
Refer to this section before upgrading from any version of AKO to AKO version 1.5.1 and higher:

  • Refactored VIP Network Inputs AKO version 1.5.1 deprecates subnetIP and subnetPrefix in the values.yaml (used during Helm installation), and allows specifying the information via the cidr field within vipNetworkList.

  • The existing AviInfraSetting CRDs need an explicit update after applying the updated CRD schema yaml. To update existing AviInfraSettings while performing a Helm upgrade,

    1. Ensure that the AviInfraSetting CRDs have the required configuration. If not save it in the yaml files.

    2. Upgrade the CRDs to provide vipNetworks in the new format.

    3. Updating the CRD schema would remove the currently invalid spec.network configuration in existing AviInfraSettings. Update the AviInfraSettings to follow the new schema as shown above and apply the changed yaml.

    4. Proceed with Step 2 of upgrading AKO.

To upgrade AKO using the Helm repository,

  1. Helm does not upgrade the CRDs during a release upgrade. Before you upgrade a release, run the following command to upgrade the CRDs:
    
     helm template oci://projects.registry.vmware.com/ako/helm-charts/ako --version 1.7.6 --include-crds --output-dir <output_dir>
    

  2. This will save the helm files to an output directory which will contain the CRDS corresponding to the AKO version. Install CRDs using:
    
     kubectl apply -f <output_dir>/ako/crds/
     
  3. The release is listed as shown below:
    
     helm list -n avi-system
    
    NAME          	NAMESPACE 	REVISION	UPDATED                             	    STATUS  	CHART    	APP VERSION
    ako-1593523840	avi-system	1       	2020-09-16 13:44:31.609195757 +0000 UTC	    deployed	ako-1.7.5	1.7.5
     
  4. Get the values.yaml for the AKO version 1.7.6 and edit the values as per the requirement:
    
     helm repo add --force-update ako https://projects.registry.vmware.com/chartrepo/ako
     "ako" has been added to your repositories
     helm show values oci://projects.registry.vmware.com/ako/helm-charts/ako --version 1.7.6 > values.yaml
     
  5. Upgrade the helm chart.
    
      helm upgrade ako-1593523840  oci://projects.registry.vmware.com/ako/helm-charts/ako -f /path/to/values.yaml --version 1.7.6 --set ControllerSettings.controllerHost=<IP or Hostname> --set avicredentials.password=<username> --set avicredentials.username=<username> --namespace=avi-system
      

Note: In a multiple AKO deployment scenario, all AKO instances should be on the same version.

Upgrading AKO Offline Using Helm

To upgrade AKO without using the online Helm repository,

  1. Follow the steps 1 to 6 from Installing AKO Offline Using Helm.

  2. Use the following command:

    
     helm upgrade <release-name> ./ako -n avi-system
     

Delete AKO

  1. Edit the configmap used for AKO and set the deleteConfig flag to true if you want to delete the AKO created objects. Else skip to step 2.
    
     kubectl edit configmap avi-k8s-config -n avi-system 
     
  2. Delete AKO using the command shown below:
    
     helm delete $(helm list -n avi-system -q) -n avi-system
     

Note: Do not delete the configmap avi-k8s-config manually, unless you are doing a complete Helm uninstall. The AKO pod has to be rebooted if you delete and the avi-k8s-config configmap has to be reconfigured.

Parameters

The following table lists the configurable parameters of the AKO chart and their default values:

Parameter Description Default Values
ControllerSettings.controllerVersion Avi Controller version 18.2.10
ControllerSettings.controllerHost Used to specify the Avi controller IP or Hostname None
ControllerSettings.cloudName Name of the cloud managed in Avi Default-Cloud
ControllerSettings.tenantsPerCluster Set to true if you want to map each Kubernetes cluster uniquely to a tenant in Avi False
ControllerSettings.tenantName Name of the tenant where all the AKO objects will be created in Avi. Admin
L7Settings.shardVSSize Displays shard VS size enum values: LARGE, MEDIUM, SMALL LARGE
AKOSettings.fullSyncFrequency Displays the full sync frequency 1800
L7Settings.defaultIngController AKO is the default ingress controller True
ControllerSettings.serviceEngineGroupName Displays the name of the Service Engine Group Default-Group
NetworkSettings.nodeNetworkList Displays the list of networks and corresponding CIDR mappings for the Kubernetes nodes None
AKOSettings.clusterName Unique identifier for the running AKO instance. AKO identifies objects it created on Avi Controller using this parameter Required
NetworkSettings.subnetIP Subnet IP of the data network Deprecated
NetworkSettings.subnetPrefix Subnet Prefix of the data network Deprecated
NetworkSettings.vipNetworkList Displays the list of Network Names and Subnet information for VIP network, multiple networks allowed only for AWS Cloud Required
NetworkSettings.enableRHI Publish route information to BGP peers False
NetworkSettings.bgpPeerLabels Select BGP peers using bgpPeerLabels, for selective virtual service VIP advertisement. Empty List
NetworkSettings.nsxtT1LR Specify the T1 router for data backend network, applicable only for NSX-T based deployments Empty String
L4Settings.defaultDomain Used to specify a default sub-domain for L4 LB services First domainname found in cloud's DNS profile
L4Settings.autoFQDN Specify the layer 4 FQDN format default
L7Settings.noPGForSNI Skip using Pool Groups for SNI children False
L7Settings.l7ShardingScheme Sharding scheme enum values: hostname, namespace hostname
AKOSettings.cniPlugin The CNI plugin being used in a Kubernetes cluster. Specify one of: calico, canal, flannel This field is required for calico setups
AKOSettings.enableEvents enableEvents can be changed dynamically from the configmap True
AKOSettings.logLevel logLevel values: INFO, DEBUG, WARN, ERROR. logLevel can be changed dynamically from the configmap INFO
AKOSettings.primaryInstance Specify AKO instance is primary or not True
AKOSettings.deleteConfig Set to true if user wants to delete AKO created objects from Avi. The deleteConfig can be changed dynamically from the configmap False
AKOSettings.disableStaticRouteSync Disables static route syncing if set to true False
AKOSettings.apiServerPort Internal port for AKO's API server for the liveness probe of the AKO pod 8080
AKOSettings.layer7Only Operate AKO as a pure layer 7 ingress Controller False
avicredentials.username Enter the Avi Controller username None
avicredentials.password Enter the Avi Controller password None
image.repository Specify docker-registry that has the AKO image avinetworks/ako

Notes:

  • The field vipNetworkList is mandatory. This is used for allocating VirtualService IP by IPAM Provider module.

  • Each AKO instance mapped to a given Avi cloud should have a unique clusterName parameter. This would maintain the uniqueness of object naming across Kubernetes clusters.

Document Revision History

Date Change Summary
Dec 18, 2023 Updated the installation and upgrade steps for AKO version 1.7.6
Aug 14, 2023 Updated the installation and upgrade steps for AKO version 1.7.5
Aug 05, 2022 Updated the installation and upgrade steps for AKO version 1.7.2
May 31, 2022 Updated the installation and upgrade steps for AKO version 1.7.1
December 24, 2021 Updated the installation and upgrade steps for AKO version 1.6.1
October 06, 2021 Updated the installation and upgrade steps for AKO version 1.5.2
August 31, 2021 Updated the installation and upgrade steps for AKO version 1.5.1
July 29, 2021 Updated the installation and upgrade steps for AKO version 1.4.3
May 11, 2021 Updated the installation and upgrade steps for AKO version 1.4.2
April 20, 2021 Updated the installation and upgrade steps for AKO version 1.4.1
February 12, 2021 Updated the installation and upgrade steps for AKO version 1.3.3
Decemeber 18, 2020 Updated the step to upgrade CRDs during AKO upgrade(version 1.3)
November 23, 2020 Updated the Upgrade Procedure for AKO version 1.2.1 to 1.2.3
September 16, 2020 Published the Installation Guide for AKO version 1.2.1
July 20, 2020 Published the Installation Guide for AKO version 1.2.1 (Tech Preview)