IPAM Provider (Google Cloud Platform)

Overview

Avi Vantage integrates with Google Cloud Platform (GCP) for providing Internet Protocol Address Management (IPAM) services to applications running on instances in GCP. This article explains how to create a GCP profile and configure GCP IPAM.

Note: Starting with Avi Vantage version 20.1.3, Linux Server Cloud and GCP IPAM on GCP are not supported.

Prerequisites for GCP IPAM

  • Set up the Avi Controller and Service Engine instances on GCP. To know more, refer to Example Configuration of Avi Controller and SE Instances on GCP.

  • Install Avi Vantage in a Linux Cloud. To use GCP as the IPAM provider, all the Avi Controller and Service Engine instances must run in Google Cloud.  The cloud type selected within Avi should be Linux Server Cloud. To know how to set up a Linux Server Cloud, refer to Installing Avi Vantage for a Linux Server Cloud.

  • GCP uses a /32-based interface IP configuration. To support this, perform the following after configuring the Linux Server Cloud.

In the CLI,

configure serviceengineproperties
se_runtime_properties
se_handle_interface_routes

service_ip_subnets subnet/mask
save
save

Reload all the Service Engines for the configuration to take effect.

The service_ip_subnets configuration optimizes the Docker routes on the Service Engines. If VIP allocation is done from multiple subnets, specify all of them.

Configuration of GCP IPAM

Create the GCP IPAM in Avi Vantage, and configure it by following the steps given below.

Creating the IPAM Profile

  1. Navigate to Templates > Profiles > IPAM/DNS profiles.
  2. Click on Create.
  3. Enter the IPAM Profile Name.
  4. Select Google Cloud Platform IPAM as the Type as shown below.
    create new IPAM/DNS profile
  5. Click on Save.

Configuring GCP IPAM

  1. Navigate to Infrastructiure > Cloud.
  2. Select Default Cloud and click on the Edit icon.
  3. The IPAM that was created appears in the IPAM Profile dropdown list. Select the IPAM Profile.
  4. Configure a Linux Server Cloud using the IP addresses for the Avi Service Engine instances created.

GCP IPAM has been configured, and virtual services can now be provisioned.

Notes

  • On GCP only L3 scale out mode is supported for virtual services.
  • Some of the GCP zones may require the MTU to be lowered to 1400. To set the MTU on the Service Engines,
configure serviceengineproperties
se_runtime_properties
global_mtu 1400
save
save

The MTU value will take effect after the Service Engines are rebooted once.

Assigning Floating IP

Starting with Avi Vantage release 18.1.2, support for Floating IP (where a load balancer whose frontend will be a public IP allocated from GCP and the backend will be the Service Engines) is provided. Floating IP can be assigned via the CLI as shown below.


++Truncated Output++
+------------------------------------+-----------------------------------------------------+
[admin:10-146-43-2]: virtualservice> vip index 1
[admin:10-146-43-2]: virtualservice:vip> auto_allocate_floating_ip
Overwriting the previously entered value for auto_allocate_floating_ip
[admin:10-146-43-2]: virtualservice:vip> save
[admin:10-146-43-2]: virtualservice> save
++ Truncated Output++


floating_ip

Note: Assigning floating IP is currently supported via the CLI only. UI support will be scoped-in in the future releases.

port-range

Auto-allocate Floating IP

All GCP resources will be created in the SEs project. Only auto-allocation of floating IP is supported.


++Truncated Output++
[2018-07-16 06:48:08,717] INFO [gcp_nlb.allocate_vip:63] old_vip_info: vip {
addr: "55.55.55.100"
type: V4
}
alloc_fip: false
|| new_vip_info: vip {
addr: "55.55.55.100"
type: V4
}
alloc_fip: true

Swagger APIs can be used to auto-allocate a Floating IP via a PUT request using the same as below.


"vip" : [ {
"availability_zone" : "aeiou",
"ip6_address" : "",
"subnet" : "",
"port_uuid" : "aeiou",
"subnet_uuid" : "aeiou",
"avi_allocated_vip" : true,
"vip_id" : "aeiou",
"ip_address" : "",
"auto_allocate_floating_ip" : true, *
"enabled" : true,
"floating_subnet6_uuid" : "aeiou",
"auto_allocate_ip" : true,
"subnet6" : "",
"floating_ip" : "",
"floating_subnet_uuid" : "aeiou",
"avi_allocated_fip" : true,
"subnet6_uuid" : "aeiou",
"floating_ip6" : "",
"ipam_network_subnet" : "",
"network_ref" : "aeiou",
"discovered_networks" : [ "" ]


Shared-VIP

Shared VIPs can be created on the same IP as shown in the image. sharedvip

Configure GCP IPAM for Kubernetes/OpenShift

Starting with Avi Vantage release 20.1.1, the Avi Kubernetes/OpenShift clud is not supported. Refer to the OpenShift and Kubernetes Cloud - End of Support article for more information.